• +44 (0) 1623 889 892
  • |
  • enquiries@oilcare.com

Providing Quality Oil Care to Industry

Portable Filter Carts

Portable filtration units, such as the filter cart, are ideal tools to remediate contaminated systems, flush new equipment during commissioning, or periodically decontaminate systems that have inadequate on-board filtration to meet target cleanliness levels. With industrial-duty pneumatic tires, a sturdy frame, and quality components, our filter carts are ideal for easy maneuverability around plant floors.

Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates. Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant.

Heavy duty, lots of options, exceptional value … Des-Case filter carts are uniquely yours, because you pick the options you need for your specific environment and application.

Portable Filter Cart

  • Automatic pressure relief valve
  • Dual-stage filtration
  • Pump inlet strainer
  • Pneumatic wheels for easy mobility
  • Pre- and post-filter sample ports
  • Filter bypass flow valve
  • Heavy-duty frame with oil catch pan
  • One-year warranty
  • Industrial powder-coated paint
  • Decontaminating systems
  • Flushing new or repaired systems
  • Dispensing new oil
  • Pre-filtering new oil
  • Evacuating used oil
  • Reservoir top-offs
  • Collecting oil samples for analysis


  • To be used for offline, secondary filtration and not inline filtration
  • In general industrial environments, both indoors and outdoors (IP rating of 54)
  • For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C)
  • Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses
  • This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source

Pump Type

  • Gear Pump

Electric Motor

  • 0,75 kW 110v 50 Hz 1400rpms
  • 0,75 kW 230v 50 Hz 1400rpms

Permissible Flow Rate

  • 18 l/min maximum

Operating Pressure

  • 6 bar maximum

Viscosity Range

  • 10-460 cSt (60 – 2270 SSU)

Permissible Operating Fluid

  • Mineral oil (others on request)

Permitted Fluid Temperature Range

  • -10°C to 60°C

Permitted Ambient Temperature

  • -10°C to 40°C


  • NBR

Suction Strainer

  • 250μm

Protection Class

  • IP54

Length of Hoses

  • 4 metres

Hose Connections

  • Suction hose 1" ISO B
  • Pressure hose 3/4" ISO B

Weight when Empty

  • ≈ 70 kg


  • Suction Gauge – Visual
  • Pressure Gauge – Visual
  • Differential Clogging Indicator (1.55 bar) – Visual

Replacement Filter Element Part Numbers

EFC-AF Beta 200 @ 3μm
EFC-BF Beta 200 @ 6μm
EFC-CF Beta 200 @ 12μm
EFC-DF Beta 200 @ 25μm

Elements are sold in cases of six and can be mixed and matched.

Reduce downtime & improve reliability

We can also provide independent advice about your oils through modern oil analysis techniques.

Back to Top